Finden Sie schnell behäter für Ihr Unternehmen: 41 Ergebnisse

With the ramp waste system located in front of the back box, it is prevented that the wastes are easily thrown into the container and interfered with. Back piggy bank is produced in a way that it can be fixed to the floor with steel dowels, if desired, thanks to the aesthetic city furniture legs. The recycling piggy bank is used today in city centers, shopping malls, parks, hotels and outlets.

3500L Full Underground Waste Container System , Waste Container , 3500 Liter , Best Product Color Grey

The Above Ground Garbage Container System will automatically and manually control the container that can be operated by remote control, by the driver, by getting out of the vehicle or without getting out of the vehicle, and the control organs will be lifted from the lifting systems of the container with the on-board crane, the unloading on the vehicle will be carried out by the remote-controlled lower wings. Above ground container 3000 LT. garbage collection will have owners. The container body will be at least 1450×1600 and 1600 mm in size.

The raw material used is produced to be resistant to sunlight, heat and cold. Optionally, a magnetic lock system can be added. All 4 of the wheels rotate 360 degrees, 2 of them with brakes and 2 of them with non-brake swivels. The products have the feature of nesting. If it will be presented to the product, the lids can be opened more easily by adding a pedal. Front Attention MEDICAL WASTE logo and text. It is produced according to EN 840 – 6 Standards. The measurements given below are approximate and there may be +/- 5% deviation in the measurements.

3 Part Painted Recycle Trash Bin Set With Lid High Quality Luxury Best Product Painted Colors Blue Yellow Green

Stainless Steel Recycling Trash Bin Set with 4 Buckets Model Number: TK 2526 Color: Yellow , Green ,Grey , Purple

Painted Recycle Trash Bin Set Color: Light Grey. Size: 64cm*30cm. Product Cod: TK-1003D Material: Metal

TECHNICAL SPECIFICATIONS FOR 4+1 MOBILE WASTE DRIVING CENTER 1-Mobile waste collection center is manufactured according to the front dimensions of 3310x1150x2010mm according to the attached technical drawing. 2- The chassis and body parts of the mobile waste collection center will be demounted. 3- According to the attached technical drawing, the snow and rain water flow will be provided on the mobile waste collection center by inclining the rear 2.010x2.040mm. 4- The mobile waste collection center is manufactured with 5 chambers, and each waste is intended to enter the chamber from different compartments. 1= Cam waste chamber 2= Paper waste bin 3= Plastic waste container 4= Metal waste hopper 5= Battery waste container

The raw material used is produced to be resistant to sunlight, heat and cold. Optionally, a magnetic lock system can be added. All 4 of the wheels rotate 360 degrees, 2 of them with brakes and 2 of them with non-brake swivels. The products have the feature of nesting. If it will be presented to the product, the lids can be opened more easily by adding a pedal. Front Attention MEDICAL WASTE logo and text. It is produced according to EN 840 – 6 Standards. The measurements given below are approximate and there may be +/- 5% deviation in the measurements.

3 Part Painted Recycle Trash Bin Set Size: 30cm*30cm*30*cm*60cm Color: Yellow and Blue and Black Model number: 1889

Size: 800x1320x1250 cm 660 Liter Plastic Waste Container The raw material used is resistant to sunlight, heat and cold. It has four wheels, 2 with brakes and 2 without brakes. The products have the feature of interpenetration. Pedals can be added optionally. Waste cover can be added optionally Optionally, magnetic lock system can be added. Wheel dimensions can be changed according to the drawings. It can be recycled when its mission is over. It is 100% compatible with Municipal Garbage Truck Loading systems. Its leak-proof feature has been obtained through tests. It retains its color and does not fade. It can be produced with 10 alternative colors. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

The underground container system will be connected to the container system with the jack hose taken from the compressed garbage truck and it will be operated with manual control. 2- When the underground container system is operated due to the emptying of the inner container or for any other reason, it will be ensured that the garbage containers are brought to the ground level thanks to the moving platform. 3- The underground container system will be constructed in a scissor chassis structure and will be such that the inner containers can be emptied. 4- The chassis will be of high strength against bending and torsion. 5- Chassis will be 45x80 NPU, Scissors will be 50x100x4mm profile.

1100 Liter Plastic Waste Container it is produced using HDPE raw material by injection mold method. It complies with EN 840 2-5-6 Standards. It is produced from original raw material. Metal Sleeves. The garbage can be emptied easily with any standard emptier. It is resistant to UV rays, cold, heat up to 60 Cº and chemicals. There are Ø 200 mm restaurants, 2 with brakes and 2 without brakes. It has a ready-to-use design structure for data storage devices. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

The Above Ground Container System will remove the automatic and manual control and control controls of the container, which can be operated remotely by the driver, by getting out of the vehicle or without getting off the vehicle. Above ground container 3750 LT. He will have a garbage collection. The container body will be at least 1750×1600 and 1600 mm in size.

Outer Dimension: 1060 x 580 x 740 mm Galvanized Steel Shaft Cover: Hinged Cover Certification: EN 840 240 Liter Plastic Waste Container used raw material has sunlight, heat and cold. It has two wheels. The products have the feature of interpenetration. Pedals can be added optionally.

Our 120 Liter Packaging Waste Container product has been selected so that the raw material used is resistant to direct sunlight, heat and cold and has been manufactured all of them. Our product, which has been tested against various difficulties that may be encountered, has passed all the tests successfully. The raw material used is a raw material in accordance with TSE Standards. This raw material is used in all parts of our product.

MEDICAL WASTES - Infectious Wastes Microbiology laboratory wastes (Culture and stocks, Infectious body fluids, Serological wastes, Other contaminated laboratory wastes (lam-lamella, pipette, petri etc.) Blood-blood products and their hazards contaminated object Used surgical clothes (cloth, gown, gloves, etc.) Dialysis wastes (waste water and transports) Quarantine wastes Air filters containing bacteria and viruses, Infected experimental animal carcasses, organ parts, blood and all purpose that come into contact with objects Pathological Wastes such as operating rooms, morgue, autopsy, forensic medicine such as consumer cushion parts, organic parts, placenta, cut longs, etc. (human pathological waste) Injector needle, other needle-containing tips, scalpel, lam-lamella, glass pasteur pipette, other broken glass, etc.

Size: 800x1320x1250 cm 660 Liter Plastic Waste Container The raw material used is resistant to sunlight, heat and cold. It has four wheels, 2 with brakes and 2 without brakes. The products have the feature of interpenetration. Pedals can be added optionally. Waste cover can be added optionally Optionally, magnetic lock system can be added. Wheel dimensions can be changed according to the drawings. It can be recycled when its mission is over. It is 100% compatible with Municipal Garbage Truck Loading systems. Its leak-proof feature has been obtained through tests. It retains its color and does not fade. It can be produced with 10 alternative colors. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

The raw material used is produced to be resistant to sunlight, heat and cold. Optionally, a magnetic lock system can be added. The products have the feature of nesting. If it will be presented to the product, the lids can be opened more easily by adding a pedal. Front Attention MEDICAL WASTE logo and text. It is produced according to EN 840 – 6 Standards. The measurements given below are approximate and there may be +/- 5% deviation in the measurements.

The raw material used is produced to be resistant to sunlight, heat and cold. Optionally, a magnetic lock system can be added. The products have the feature of nesting. If it will be presented to the product, the lids can be opened more easily by adding a pedal. Front Attention MEDICAL WASTE logo and text. It is produced according to EN 840 – 6 Standards. The measurements given below are approximate and there may be +/- 5% deviation in the measurements.

Metal Galvanized Waste Container – Our 1100 Liter product is manufactured from A-1 quality galvanized sheet. It can be produced as hot dip galvanized or original galvanized. It can be produced with and without pedal options. Body and base are manufactured from a single piece of sheet metal in a conical shape to increase strength. In addition,strength-enhancing form has been given to the side parts. Considering its weight and usage areas, lifting arms are manufactured in accordance with the lifting systems of garbage trucks. In addition, 4 wheels, one of which is with a brake, are placed for our 1100 Liter Metal Garbage Container to be easy to move and transport. Welded using gas metal arc welding. Apart from 1100 liters, it can also be produced in 770 liters, 660 liters and 400 liters capacities. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

Height: 130cm; Width: 135cm; Depth: 103cm; Weight: 51kg 1100 Liter Plastic Waste Container it is produced using HDPE raw material by injection mold method. It complies with EN 840 2-5-6 Standards. It is produced from original raw material. Metal Sleeves. The garbage can be emptied easily with any standard emptier. It is resistant to UV rays, cold, heat up to 60 Cº and chemicals. There are Ø 200 mm restaurants, 2 with brakes and 2 without brakes. It has a ready-to-use design structure for data storage devices. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

Size: 800x1320x1250 cm 660 Liter Plastic Waste Container The raw material used is resistant to sunlight, heat and cold. It has four wheels, 2 with brakes and 2 without brakes. The products have the feature of interpenetration. Pedals can be added optionally. Waste cover can be added optionally Optionally, magnetic lock system can be added. Wheel dimensions can be changed according to the drawings. It can be recycled when its mission is over. It is 100% compatible with Municipal Garbage Truck Loading systems. Its leak-proof feature has been obtained through tests. It retains its color and does not fade. It can be produced with 10 alternative colors. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

Our metal galvanized waste containers can be specially produced in line with the technical specifications of the product. It can be produced as hot dip galvanized or original galvanized. It can be produced with and without pedal options. Apart from 1100 liters, it can also be produced in 770 liters, 660 liters and 400 liters capacities. Cover lid color can be in different options.

Size: 800x1320x1250 cm 660 Liter Plastic Waste Container The raw material used is resistant to sunlight, heat and cold. It has four wheels, 2 with brakes and 2 without brakes. The products have the feature of interpenetration. Pedals can be added optionally. Waste cover can be added optionally Optionally, magnetic lock system can be added. Wheel dimensions can be changed according to the drawings. It can be recycled when its mission is over. It is 100% compatible with Municipal Garbage Truck Loading systems. Its leak-proof feature has been obtained through tests. It retains its color and does not fade. It can be produced with 10 alternative colors. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

Outer Dimension: 940 x 480 x 540 mm Material: HDPE Galvanized Steel Shaft Cover: Hinged Cover Certificate: EN 840 120 Liter Garbage Container used raw material has sunlight, heat and cold. It has two wheels. The products have the feature of interpenetration. Pedals can be added optionally. Optionally, magnetic lock system can be added. Optionally, a waste cover can be added. Made from recyclable material. It can be easily opened, emptied and used. Its leak-proof feature has been obtained through tests. It retains its color and does not fade. It can be produced with 10 alternative colors. The properties and conditions requested by the groups are written on the containers by silk screen printing or hot stamping. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

Outer Dimension: 1060 x 580 x 740 mm Galvanized Steel Shaft Cover: Hinged Cover Certification: EN 840 240 Liter Plastic Waste Container used raw material has sunlight, heat and cold. It has two wheels. The products have the feature of interpenetration. Pedals can be added optionally. Optionally, magnetic lock system can be added. Optionally, a waste cover can be added. Made from recyclable material. It can be easily opened, emptied and used. Its leak-proof feature has been obtained through tests. It retains its color and does not fade. It can be produced with 10 alternative colors. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

Our metal galvanized waste containers can be specially produced in line with the technical specifications of the product. It can be produced as hot dip galvanized or original galvanized. It can be produced with and without pedal options. Apart from 1100 liters, it can also be produced in 770 liters, 660 liters and 400 liters capacities.

Size: 800x1320x1250 cm 660 Liter Plastic Waste Container The raw material used is resistant to sunlight, heat and cold. It has four wheels, 2 with brakes and 2 without brakes. The products have the feature of interpenetration. Pedals can be added optionally. Waste cover can be added optionally Optionally, magnetic lock system can be added. Wheel dimensions can be changed according to the drawings. It can be recycled when its mission is over. It is 100% compatible with Municipal Garbage Truck Loading systems. Its leak-proof feature has been obtained through tests. It retains its color and does not fade. It can be produced with 10 alternative colors. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.

240 Liter Plastic Waste Container with Pedal used raw material has sunlight, heat and cold. It has two wheels. The products have the feature of interpenetration. Pedals can be added optionally. Optionally, magnetic lock system can be added. Optionally, a waste cover can be added. Made from recyclable material. It can be easily opened, emptied and used. Its leak-proof feature has been obtained through tests. It retains its color and does not fade. It can be produced with 10 alternative colors. The measurements given above are approximate and there may be +/- 5% deviation from the measurements.