Finden Sie schnell regelgerät für Ihr Unternehmen: 11 Ergebnisse

Multiturn encoders with EtherCAT interface – UL Listed - 8192 steps/revol. – 29 bit resolution - different mechanical versions available Absolute encoders MEM-BUS EtherCAT comply with Profile CANopen over EtherCAT (CoE), Cia DS-406. They avail on EtherCAT conformance certification and are UL Listed for the canadian and US market. Based upon Ethernet communication protocol, EtherCAT interface is steady, flexible and fast, specially suited to the communication among control systems and peripheral devices, such as I/O systems, drives, sensors and actuators. EtherCAT operating principle – processing on the fly – enables a Real Time communication between the Master and the Slave devices; it supports any topology – line, bus, tree, star – and a flexible number of nodes. Reduced cabling and easy configuration – each slave is addressed automatically – simplify the installing operations. MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. The stout aluminium case ensures a high protection degree, so that it is possible to apply MEM-Bus encoders in severe industrial environments. The innovative electronic construction technology – involving no mechanical gear –allows to reach high acceleration and speed values and grants the transducer long life.   Fieldbus interface:: EtherCAT Encoder Profile: CANopen over EtherCAT (CoE), CIA DS-406 Physical Layer: EtherCAT 100Base-TX, Fast Ethernet, ISO/IEC 8802-3 Resolution: 29 bit Body diameter: 58 mm Coupling: Square flange, Round flange, solid or hollow shaft

... aufrecht zu erhalten. Es handelt sich praktisch um Kontroller, die den Druck der Flüssigkeit in einem bestimmten Druckbereich regeln. Die Betriebsweise der Druckwächter wird durch zwei Schlüsselparameter charakterisiert: • Betätigungsdruck • Anfangsdruck Im Unterschied zum Manometer führt der Druckwächter jedoch keine Messung durch, sondern wird dort eingesetzt, wo bei einer Schwankung der Druckwerte eine Änderung des Zustandes nötig ist. Druckwächter für verschiedene Industriesektoren Das Unternehmen RVS, mit Niederlassung in der Provinz von Turin, ist in der Lage, Druckregler und Druckanzeiger für Ölhydraulik und zahlreiche andere Sektoren zu liefern, auch für spezielle und aufwändige Anwendungen. Die gehandhabten Marken sind die verlässlichsten und innovativsten des Sektors: • Bosch • Rexroth • Fox • Keller Dank eines Katalogs der Druckwächter, der ständig weiterentwickelt wird, ist die Gesellschaft aus Turin im Laufe der Jahre zu einer der wichtigsten Größen auf nationaler Ebene geworden und ist in der Lage, zahlreiche italienische Provinzen zu beliefern.

Aufbewahrung und Transport der numerischen Steuergeräte. Flexibel in details. Eine optimale Nutzung des vorhandenen Raumes für die Unterbringung der numerischen Steuerungsgeräte ist durch eine große Auswahl an Zubehör der HUNI Italiana gewährleistet, die für deren Verwahrung und Transport notwendig sind. Die neuen Produktionstechnologien benötigen immer stärker eine Einbindung von Arbeitszentren und hoch entwickelte C.N.-Maschinen, die teures Zubehör benötigen. Daraus ensteht die Notwendigkeit, diese sorgfältig zu handhaben, sowohl während der Bewegung vom Magazin zu den Werkzeugmaschinen aber auch von den Maschinen zu den Kontroll- und Presettingzentren. Die HUNI Italiana verfolgt immer aufmerksam die Bedürfnisse eines Sektors, der sich in rascher Veränderung befindet und hat daher ein System entwickelt, in das größtenteils Standardprodukte integriert sind und das in der Lage ist, auch spezielle Anforderungen des Verwaltungsbereichs, der Wartung und der Verwendung von auch kostbarem Zubehör zu erfüllen.

Multiturn encoders withEtherNet/IP interface – UL Listed - 8192 steps/revol. – 29 bit resolution - different mechanical versions available Based on the industrial Ethernet communication protocol, EtherNet/IP™ interface allows for a steady, flexible and fast communication between control systems and peripheral devices (i.e. sensors and actuators). Elap encoders MEM-Bus EtherNet/IP can be easily integrated in any EtherNet/IP net, as they comply with all EtherNet/IP interface requirements, according to directives IEC61784-1. The encoder features the encoder profile 22H according to CIP™ protocol specifications.The encoders are ODVA conformant certified, including CIP Sync certification. The encoders parameters – steps/revolution, preset number, rotation direction, speed/position alarm thresholds, unit – are set via TCP/IP. The measuring unit can be modified run-time. Besides the standard Assembly Objects 1,2,3, Elap encoder supports the proprietary object 110, granting a comprehensive view of parameters and alarms relating to speed and position. IP addressing can be set both by rotary switches and via software (DHCP/BOOTP) 4 two-color signalling LEDs provide the diagnostic information about the device status in the net. The encoder supports the DLR (Device Level Ring) functionality, granting continuity in operation even in case of net interruptions. MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. The stout aluminium case ensures a high protection degree, so that it is possible to apply MEM-Bus encoders in severe industrial environments. The innovative electronic construction technology – involving no mechanical gear –allows to reach high acceleration and speed values and grants the transducer long life. MEM-Bus EtherNet/IP are UL certified for the Canadian and United States market. Fieldbus interface:: EtherNet/IP Encoder Profile: CIP™ Protocol, encoder profile 22H Body diameter: 58 mm Coupling: Square flange, Round flange, solid or hollow shaft Resolution: 29 bit

Multiturn encoders with Profinet interface – UL Listed - 8192 steps/revol. – 29 bit resolution - different mechanical versions available Elap absolute encoders series MEM-Bus comply with the Encoder Profile Specifications V4.1 version 3.162 related to Profidrives. They fulfil the requirements of the Application Classes 3 and 4,that is they provide all functions for scaling factor, preset, rotational direction, positioning and speed values, diagnostic. MEM-Bus encoders support the RT Real Time and IRT Isochronous Real Time transmission mode, thus ensuring fast, accurate and safe data transfer. Besides standard telegrams 81, 82, 83, 84 Elap encoders support the user telegram 860, featuring Profibus telegram, a peculiarity which simplifies the encoder handling, as well as the possible migration from Profinet devices. The encoders real time diagnostic function ensures the device state constant monitoring. MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. The stout aluminium case ensures a high protection degree, so that it is possible to apply MEM-Bus encoders in severe industrial environments. The innovative electronic construction technology – involving no mechanical gear –allows to reach high acceleration and speed values and grants the transducer long life. MEM-Bus encoders are PROFINET certified and UL listed for the Canadian and United States market. Fieldbus interface:: Profinet Encoder Profile: V4.1 version 3.162 Application classes: 3-4 Resolution: 29 bit Body diameter: 58 mm Coupling: Square flange, Round flange, solid or hollow shaft

Multiturn encoders with CANopen interface – UL Listed - 8192 steps/revol. – 29 bit resolution - body diameter 40 mm - solid and hollow shaft available The absolute encoders series MEM-Bus avail on an interface to connect to field bus systems according to the CANopen standard. The encoders comply with standards CIA DS301, DS406, DS 305, featuring the functions of Class 2. They are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). The encoder operating parameters are set directly by the user: revolutions no., steps per rev., rotation direction and preset no. The diagnostic function signals possible parameter, position or temperature errors as well as the battery alarm – the data memory is anyway ensured for a long period (30 years). The baud rate and node selection can be easily set by LSS protocol or by means of dip-switches. MEM40-Bus encoders avail on 3 signalling LEDs for supply state, line and error. The encoder comes with metal housing, round flange, solid or hollow shaft, to meet any application requirement. The electrical connection is by M12 connector. The stout case ensures a high protection degree to enable applications in severe industrial environments. The innovative electronic construction technology – involving no mechanical gear –allow to reach high acceleration and speed values and grants the transducer a long life. MEM40-Bus encoders are UL listed for the Canadian and United States market. Fieldbus interface:: CANopen Resolution: 29 bit Programming: by dip-switches Body diameter: 40 mm Coupling: Solid or hollow shaft

Incremental rotary encoder size 58 - compact - 2 to 12500 ppr - UL Listed - round or square flange, solid or hollow shaft - M12 connector Compact sized encoders series REC fit to any application where short body dimensions are required – the case length only measures 38 mm. REC encoders are available with different mechanical versions: with round flange and servo copling (type REC520/REC540), square flange (REC620) or hollow shaft, with (REC450) or without elastic support(REC440). The case is out of strong aluminium and connections are ensured by the connector type M12, or optionally by cable. The encoder with M12 connector output is UL Listed for the canadian and US markets. The pulses per revolution number ranges from 2 to 12500. Size: 58 mm diameter Coupling: Round or square flange, solid or hollow shaft Pulses per revolution: 2 to 12500 Output signals: push pull, line driver Supply voltage: 5/30 Vdc Electrical connections: M12 connector Certifications: UL Listed

Linear motion potentiometers with strokes ranging from 50 to 950 mm, resistance value 5 KOhm. Strong and accurate for industrial applications. Easy mounting method. Several fittings available. The linear motion potentiometers series PNS, PN2S and PN231 have a 31 mm square section housing. Their measuring strokes range from 50 to 950 mm, and their standard resistive value is 5 KOhm. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The connections are granted by means of M12 connector. Thanks to their high protection degree against environmental agents the potentiometers are suited for severe applications, even outdoors, at extreme temperatures. Series with analogue output available. Housing: Aluminium housing Strokes: 50 to 950 mm Resistive value: 5 KOhm Resistive element: Conductive plastic Connections: M12 connector Protection degree: IP65 Fixing: By movable feet or ball joints

Wire transducers series WPS and WDS provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. Strokes range: 2300 to 15000 mm Wire transducers series WPS and WDS are composed by the draw-wire mechanics coupled to Elap multiturn absolute high-resolution encoder MEM-BUS or MEM. They can provide different communication protocols – EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI output signal. The encoder grants high resolutions values (28 or 29 bit) and strokes ranging between 2300 and 15000 mm. WPS housing is out of glass fiber reinforced nylon, whilst the wire consists of coated poliamide stainless steel. WDS housing is out of aluminium, whilst the wire consists of coated poliamide stainless steel. Available strokes:: 2300, 3000, 5000, 7500, 10000, 15000 mm Housing: Aluminium (WDS) - Glass fiber reinforced nylon (WPS) Wire material: Coated poliamide stainless steel Resolution: 29 bit Output signals: EtherNet/IP, EtherCAT, PROFINET, Profibus, CANopen or SSI

Linear motion potentiometers with strokes ranging from 25 to 150 mm, resistance value 5 KOhm. Small-sized, rounda section, accurate for industrial applications. Easy mounting method. The linear motion potentiometers series PR have a 26 mm diameter round section housing and 5 mm diameter shaft. Their measuring strokes range from 25 to 150 mm, and their standard resistive value is 5 KOhm. The series PR2S avails on two ball joints at the ends. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The IP65 protection degree against environmental agents allow to employ the potentiometers series PR/PR2S for severe applications, even outdoors, at extreme temperatures. The potentiometer mounting method is extremely easy: it can be fixed by means of metal clamping brackets, or by the front screw thread. Several fittings are available: ball joint, self-aligning joint, feeler pin. Available strokes:: 25, 50, 75, 100, 150 mm Resistive value: 5 KOhm, 1 KOhm for stroke 25 mm Resistive element: Conductive plastic Resolution: Infinite Housing: Aluminium, round section, 26 mm diameter Shaft diameter: 5 mm Protection degree: IP65

Linear motion potentiometers with strokes ranging from 25 to 150 mm, resistance value 5 KOhm. Small-sized, accurate for industrial applications. Easy mounting method. Several fittings available. Thanks to their small size – 21 mm square section case – the linear potentiometers seris PT and PT2S can be profitably employed for those applications where limited dimensions are a critical factor. The series strokes range from 25 to 150 mm. The series PT2S avails on two ball joints at the ends. The electrical connection is granted by means of M12 connector. The stout extrused aluminium housing grants a high protection degree against environmental agents. Ball joints, feeler pin, spring device available. Available strokes:: 25, 50, 75, 100, 150 mm Resistive value: 5 KOhm, 1 KOhm for stroke 25 mm Resistive element: Conductive plastic Housing: Aluminium housing, mm 21 x 21 Shaft diameter: 5 mm Resolution: Infinite Fixing: by movable feet or ball joints Available fittings: Ball joints, return spring, feeler pin Connections: M12 connector