Finden Sie schnell schiefer für Ihr Unternehmen: 2 Ergebnisse

TXgard-IS+ ist ein eigensicherer Gift- und Sauerstoffgasdetektor mit einem lokalen LCD-Display. pecifications Size 160 x 123 x 92mm (6.3 x 4.8 x 4.5ins) Weight 0.7kg (1.5lbs) Ingress protection IP65 Enclosure material Junction box: Carbon loaded nylon Sensor housing: ABD Plastic Power 8-32Vdc, 4-20mA loop-powered Cable entries 1 x M20 or 1/2” NPT with adaptor Operating temperature -20°C to +55°C (-4°F to 132°F) * Humidity 15 to 90% RH non-condensing Display 2-Line, 16 character LCD Calibration method Via push-buttons Electrical output 2 wire 4-20mA sink Terminals Suitable for up to 2.5mm2 cable Sensor type Electrochemical Repeatability +/- 2% FSD typically Zero drift +/- 2% FSD, 6 months typically Response time Contact Crowcon for a full list of sensor response times Performance Tested in accordance with EN60079-29-1 Hazardous area zones Zone 0, 1 or 2 Division 1 or 2 (when connected via an isolation device) Approvals Ex II 1 G Ex ia IIC T4 (-40°C to +65°C) Exia IIC T4 Gb Tamb -20°C to +55°C UL Class I, groups A, B, C and D EMC compliance EN 50270, FCC: CFR 47 Part 15, ICES-003 * Figures shown exclude the sensors – Please contact Crowcon for a full list of sensor operating temperatures Gases and Ranges Gas Range Available Ammonia (NH3) 50, 100, 1000ppm Chlorine (Cl2) 5, 10, 20ppm Carbon monoxide (CO) 250, 500ppm Chlorine dioxide (ClO2) 1ppm Hydrogen (H2) 2000ppm, 50% LEL, 100% LEL Hydrogen cyanide (HCN) 25ppm Hydrogen sulphide (H2S) 25, 50, 100, 200ppm Hydrogen fluoride (HF) 10ppm Nitrogen dioxide (NO2) 10ppm Oxygen (O2) 25% vol. Ozone (O3) 1ppm Phosgene (COCl2) 1ppm Phosphine (PH3) 2ppm Sulphur dioxide (SO2) 10, 20, 30ppm

TXgard Plus ist ein flammensicherer,(Ex d), ATEX, IECEx zertifizierter, Gift- und Sauerstoffgasdetektor mit LCD-Display. Specifications Size 200 x 115 x 115mm (7.9 x 6.1 x 6.1ins) Weight 2.2kg (4.9lbs) Ingress protection IP65 Enclosure material Junction box: Marine grade alloy Sensor housing: 316 stainless steel Power 10-30Vdc, 210mA max (relay version) 160mA max (non relay) Cable entries 2 x M20 or 1/2” NPT Operating temperature -10°C to +55°C (-14°F to 131°F) * Humidity 15 to 90% RH non-condensing Relays (optional) SPNO or SPNC contacts rated 30Vdc 1A (non-inductive load) for Alarm 1, Alarm 2, Fault Display 3-digit LCD back-lit display, LED status indicator Calibration method Via magnetically operated buttons Electrical output 3 wire 4-20mA, sink or source Terminals Suitable for up to 1.5mm2 cable Sensor type Electrochemical Repeatability +/- 2% FSD typically Zero drift +/- 2% FSD, 6 months typically Response time Contact Crowcon for a full list of sensor response times Performance Tested in accordance with EN60079-29-1 Hazardous area zones Zone 1 or 2 Approvals Ex II 2 G Ex db IIC T6 Tamb -20°C to +55°C EMC compliance EN 50270, FCC: CFR 47 Part 15, ICES-003 * Figures shown exclude the sensors – Please contact Crowcon for a full list of sensor operating temperatures Gases and Ranges Gas Range Available Carbon monoxide (CO) 100, 250, 500, 1000ppm Hydrogen sulphide (H2S) 25, 50, 100, 200ppm Oxygen (O2) 25% vol.