Finden Sie schnell kautschuck für Ihr Unternehmen: 373 Ergebnisse
Polyimide 8000 series 80% PTFE 20% polymide / Tecasint 8001
TECASINT 8001 yellow brown has been made from PTFE with a modification of 20% PI. Its properties include reduced creep under load and excellent sliding and friction properties. The material is ideally
PTFE WITH 20% POLYIMIDE
TECASINT 8001 yellow-brown has been made from PTFE with a modification of 20% PI. Its properties include reduced creep under load and excellent sliding and friction properties. The material is ideally suited to soft mating materials e.g. stainless steel, brass, aluminium or bronze.
Polyimide 4000 series unfilled / Tecasint 4111
Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability (HDT/A=470°C), extremely low moisture absorption and high mechanical rigidity.
UNFILLED POLYIMIDE
Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability, extremely low moisture absorption and high mechanical rigidity. This is accompanied by a very high oxidative stability and increased resistance to chemicals. TECASINT 4111 has a very high thermal stability (HDT/A=470°C). Rigidity and modulus are significantly increased vis-a-vis conventional polyimides in a temperature range up to 400 °C. The material has minimal thermal and electrical conductivity. The plastic is highly pure with low outgassing in accordance with ESA regulation ECSS-Q-70-20.
Polyimide 5000 series unfilled / TECASINT 5111
The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion.
UNFILLED POLYIMIDE
The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. Polyimides are non-melting polymers with a service temperature of 300 °C, which is considerably higher than that of PEEK or PPS. In addition, TECASINT 5111 natural has a high creep resistance. These properties makes PI plastic ideal for applications where high temperature resistance is required, such as in the aerospace industry.
TECASINT 5111 natural has good chemical resistance, especially to light acids and many organic solvents. In combination with the very good electrical insulating properties of the PI material, TECASINT 5111 natural is also perfectly suited for applications in the semiconductor industry, electrical engineering or mechanical engineering.
Moreover, the polyimide material has good mechanical properties, good wear resistance and is also resistant to high-energy radiation.
TECASINT 5111 natural is produced as polyimide sheet, polyimide rod and tube.
GESTANZTE ODER GESCHNITTENE TEILE
Stanzartikel und geschnittene Teile aus allen gängigen Gummiqualitäten (auch der DIN5510,
NF-F 16101, BS6853, EN 45545 entsprechend), sowie SIL- und zellige Materialien — auf Wunsch selbstklebend.
Kühltürme
Kühlturmbau Berkmann produziert und entwickelt seit 1970 offene Kühltürme mit höchster Energieeffizienz in Österreich. Wir bieten einzigartige Lösungen, die exklusiv bei uns erhältlich sind.
Auch die Instandhaltung sowie Ersatzteilbeschaffung für Kühltürme ist eine unserer Kernkompetenzen. Reparatur Kühltürme - Ersatzteile
Gehäusebau (Becken und Behälter)
Unsere eigene Formschreinerei ermöglicht es uns GFK-Behälter in allen Größen und Formen zu produzieren.
Wir haben uns auf die Fertigung von Sonderteilen sowie Klein- und Mittelserien spezialisiert.
wie zum Beispiel:
Wassertanks, Speicherbecken, Blumentröge, Wassertröge, Brunnen, Sand und Streugutcontainer, Viehtränken und vieles mehr….
Gerne bieten wir Ihnen eine individuelle Lösung an.
Hohlkegeldüsen - Vollkegeldüsen
Hohlkegeldüsen
sind für kleinere Wassermengen geeignet. Material: Polypropylen
Sprühwinkel 120° bei 200mm Entfernung - Anschlussgewinde 1/2" (aussen)
Vollkegeldüsen
sind für größere Wassermengen oder verschmutztes Wasser geeignet -
Anschlussgewinde 1/2" - 4" (aussen)
