Finden Sie schnell stationen für Ihr Unternehmen: 15 Ergebnisse

Obergurtstationen werden heute vorwiegend in 3-teiliger Ausführung verwendet. Die verstärkte Ausführung wird bei höherer Gewichtsbelastung beziehungsweise mehr Fallhöhe des Materials eingesetzt. Sie hat in diesen Bereichen eine wesentlich bessere Standzeit. Unterbandhalter haben wir in 2 verschiedenen Ausführungen lagernd. Flachbandhalter werden vorwiegend in der Recyclingindustrie, wenn der Gurt im Obertrum flach über Rollen läuft, eingesetzt.

Bedruckte oder gravierte Wetterstationen sind praktische und nützliche Werbegeschenke. Es gibt Sie in einfacher Form nur mit Temperaturanzeige und zusätzlich viele Modelle mit diversen Features wie Feuchtigkeitsmessung (Hygrometer), Uhrzeitanzeige, Datumsanzeige, Luftdruckanzeige, Wettervorhersage und vieles mehr. Helfen Sie Ihren Kunden dabei, immer über die aktuelle Temperatur oder Luftfeuchtigkeit informiert zu sein. Ein hochwertiger Werbeartikel für jede Jahreszeit.

Für die vollautomatisierte Übergabe von Lebensmitteln von einer Anlage zur nächsten. Dies erfolgt abwechselnd mittels zweier Gondeln. Die gesamte Anlage ist in Edelstahlbauweise und FDA konform. Taktzeit (gesamt): 5sec. Tragkraft/Gondel (Produktgewicht): max. 25kg

Typische Anwendungsfälle sind Pumpwerke, Pressschächte, Absenkschächte und Behälterbauwerke. Monolithische Bauwerke werden überall dort eingesetzt, wo hohe Dichtheit gefordert wurd und hohe statische Anforderungen herrschen. Die Herstellung im Gussverfahren garantiert höchste Qualität. Typische Anwendungsfälle sind Pumpwerke, Pressschächte, Absenkschächte und Behälterbauwerke. Ausführungsmöglichkeiten: - Stahlbeton aus erhöht sulfatbeständigem Zement (HS) - Stahlbeton mittels Hochleistungsbeton für aggressive Abwässer - Stahlfaserbeton - Epoxydharzvergütung - Anschlüsse für alle gängigen Rohrtypen - Einbauteile und Anschlussflansche - Inliner (Innenauskleidung) - Steighilfen in Leiterausführung - Herstellung nach Kundenanforderungen

Schicken Sie uns eine Anfrage mit Ihren Wünschen, Material, Texten, Logo, Anzahl, Größen usw. Materialien: Alutafeln PVC-Tafeln Plexiglas opal oder glasklar Leuchtschilder Beschriftung: Folienschnitt oder 4c Solvent Digitaldruck

Auf dem Betriebsgelände befindet sich eine Schlüsseltankstelle, wo wir die folgenden Markentreibstoffe zu Bestpreisen – rund um die Uhr, 365 Tage im Jahr – anbieten. • Diesel • Biodiesel • Normalbenzin • Eurosuper Unser Tanksystem funktioniert per Chipkarte, welche Sie sich direkt bei uns im Betrieb lösen können. Die monatliche Abrechnung erfolgt bequem über Bankeinzug. Während den Geschäftszeiten ist Tanken natürlich auch gegen Barzahlung möglich.

PRODUCT DESCRIPTION The ExxxT-xx current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is splitable, which makes it easy to put the sensor on an existing cable. Earthing could be done at the current sensor, or through the shielding of the cable or through the S2 connection inside the IED. PRODUCT ADVANTAGES Passive technology – no active parts are inside, nor a power supply is needed Splitable form factor for retrofit installations Easy installation on bushings and cables Correction factors for amplitude and phase inaccuracy improve the sensor class Available as ECO-variant: Initial accuracy class 1, utilizing correction factors accuracy class oimprovement possible IP67 protection if needed

PRODUCT DESCRIPTION The voltage sensors of Type VxxxC-xx are commonly used in T-connectors of different manufacturers. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length of a standard blind plug Robust design – Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible to T-connectors acc. IEC50181, Type C connectors Wide temperature range

PRODUCT DESCRIPTION The ExxxR-xx current sensor is dedicated to installations on the bushing of gas insulated switchgear on the secondary energy distribution level. With a slim design, the holding system can be adapted to different kinds of T-connectors. Earthing can be done at the current sensor, through the shielding of the cable, or through the S2 connection inside the IED (intelligent electronic device). PRODUCT ADVANTAGES Passive technology – no active parts are inside, and no power supply is needed Splitable form factor for retrofit installations Easy installation on bushings and cables Correction factors for amplitude and phase inaccuracy improve the sensor class Available as ECO-variant: Initial accuracy class 1, utilizes correction factors for accuracy class improvement IP67 protection if needed

PRODUCT DESCRIPTION The voltage sensors of Type VxxxL-xx are for indoor air insulated switchgears. The sensor can resist horizontal forces and can be used as an insulated support for bus bars, from which the voltage is measured. The Sensor is secured in place in the opposite end by a single nut which is also used as a connection to common earth. An output cable on the same end is used for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Bending strength can be specified by customer Passive components – No need for power supplies for internal active devices Easy installation – Single bolt used to secure the sensor on the under side Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type VxxxAQ-xx are commonly used inside elbow connectors. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length as the elbow connector Compatible with many different Elbow-connectors Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type V360C-xx are commonly used in T-connectors of different manufacturers. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length of a standard blind plug Robust design – Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible to T-connectors acc. IEC50181 up to 36kV, Type C connectors Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type VxxxK-xx are commonly used in asymmetric T-connectors of different manufacturers. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor -Sensor is the length of a standard blind plug Robust design – Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible to asymmetric T-connectors from brands Nexans, Südkabel, Tyco and NKT Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type VxxxB-xx is dedicated to the new T-connector of Euromold/Nexans, called (K)(M)480TB. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED) PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length of a standard blind plug Robust design -Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible to the new T-connector of Euromold/Nexans, called (K)(M)480TB Wide temperature range

PRODUCT DESCRIPTION The voltage sensors of Type VxxxAE-xx are commonly used in T-connectors of different manufacturers. T-connectors use a blind plug to secure the T-connector in place after installation. Our sensors can be used instead of the blind plug in the T-connector and serve both to secure the T-connector in place and measure voltage. The sensor has a point for common earth connection, and an output cable for connection with an intelligent electronic device (IED). PRODUCT ADVANTAGES Passive components – No need for power supplies for internal active devices Short-form factor – Sensor is the length of a standard blind plug Robust design – Tightening cap made of solid aluminum, which can withstand an installation torque of up to 50Nm Compatible with many different T-connectors Wide temperature range